-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- […
-
Hallo zusammen,
ich habe nun den TSOL-M800 bekommen (auf 600W limitiert). Dieser hat eine Seriennummer die mir R*************** beginnt und 16 Stellen hat. Dieser hat auch ein WLAN Modul, jedoch si…
-
I love OpenDTU! I'm using OpenWB as a Wallbox and more and need all the actual data in it.
At the moment i'm sending the data like this:
OpenDTU => MQTT to HomeAssistant => NodeRed SUM all inve…
-
### What happened?
Hello
since Firmware update from (23.3.xx) i get on two(of 6) microinverters a lot of time calibration.
Microinverter is not reachable for long time, up to 2h.
All 6 inverters:
…
-
problem:
values of pv-inverters overall produced kwh from time to time reset to 0.
this happens
- randomly at night -> I think network connection between inverter (SMA) and cerbo is lost. reason…
-
Hallo ich habe es geschafft dieses Script für die nulleinspeisung über opendtu und hoymiles. Alles super.
nun möchte ich aber die überschüssige Energie die ich noch habe auf Akkus zurückführen.
…
-
## Hardware
ESP32
### RF Module
nRF24L01+
CMT2300A, Typ: E49-900M20S
### Antenna:
* [ ] circuit board
* [ ] external antenna (SMA)
### Power Stabilization:
3 x 22uF multilayer capacitor…
kiu77 updated
2 weeks ago
-
### What happened?
This is Not the Same as #1770, Bit it‘s close to.
Berauschend of that i opened a new issue.
i noticed tonight that (After Setting the "Yield Day correction") the yield day Valu…
-
## Hardware
* [X] ESP8266
* [X] ESP32
* [ ] Raspberry Pi
Modelname: ______
Retailer URL: ______
### nRF24L01+ Module
* [X] nRF24L01+ you verified this is a **Plus model** capable of t…
-
Question:
Is it possible to integrate only some of the OpenDTU inverters in Victron?
For example: I have several inverters in OpenDTU. But only 1 is relevant.
If I add only one to the configurat…