-
There are a number of hardcoded configuration values currently:
- electrical zero angle (motor + sensor alignment)
- motor pole count
- motor orientation
- HX711 upper and lower thresholds
- VEML…
-
in function `hx711_delay_us':
undefined reference to `__nop'
I have put this lib in stm32 project Drivers folder and given path properly
Having this issue can guide me on what I am doing wrong
-
Hi.
I just connected the hx711 model to the P5 header but are unable to read any data.
I just try with 2 different sensor from 2 different manufacturer, but all time say "no data to consider".
Also …
-
Hello ,
I am facing problems and I wonder if someone is willing to help me out.
The scenario is this?
ESP32 WROOM 32
4 – 50 kg load cells
01 – HX711
Library : https://github.com/bogde/HX71…
-
Hi! First off all, many thanks for great and easy to use library!
Recently I came over an issue when trying to implement OTA update in my sketch. Everything works fine from the example sketch that I …
-
hi Bogde,
Thank you for your HX711 library code. I used it on HX711 and it worked well.
I tried to used same on another MCU.
I observed that the values returned by Read() on Arduino is significantl…
-
Thank you for the great code and support.
I found also that thinks get a little tricky when using 2 sensors on 1 pico.
Then I read this helpful thread:
https://github.com/endail/hx711-pico-mpy/…
-
Unfortunately since the hx711 is trying to be as efficient as possible and only use two lines, the low power mode functionality is interfering with communication using the blue. If the clock is brough…
AWatk updated
6 years ago
-
I tested the example "HX711_full_example", in line 49, it was:
`scale.tare(); // reset the scale to 0`
I found it was same in example on github, my question are:
1. due to the function's…
-
Hi there,
I'm attempting to get my Wemos D1 Mini Pro working with your bed sensor scripts, however after flashing both files I'm getting reboot errors.
I modified config.h to suit my config, sh…