-
Running `idf.py --version` complains that Git can't get the version.
```
$ idf.py --version
fatal: not a git repository: '/nix/store/zxyj5pafs2v9dbc1ij30zxg00cyi20a9-esp-idf-v4.3.1/.git'
WARNING…
-
# esp32p4 support status
- Low Power System
- ✅ Low Power Core (RISC-V)
- ❗ Low-power ADC (IDF-6875)
- ❗ Low-power GPIO (IDF-7536)
- ❗ Low-power I2C Master (IDF-7540)
- ❗ Low-power I…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hey,
I was running the LVGL demo for Arduino, using the BOARD_SC07 (WT32S3-43H), and as soon as I tried the `lv_demo_widgets()` for testing the whole system, I found out the touch controller was ve…
-
To upgrade to esp-idf v5.x branch, it's not difficult. However, there is a small change on the GCC side makes esxp1302 containing lots of lines needing to be fixed accordingly.
Per the migration gu…
-
~~Ideally we can support both IDF 3 _and_ 4 (i.e. the NodeMCU branches `dev-esp32-idf3-final` and `dev-esp32`).~~
NodeMCU firmware `dev-esp32` is now on IDF ~4~ 5 (as per https://github.com/nodemcu…
-
My issue could be caused by my lack of experience and knowledge, so sorry in advance if that's the case.
I can build the `mdns-responder` example on `esp32c3`, but I cannot flash and run it because…
-
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…