-
The image flashed and booted fine and works.
But it is not detected by the PC.
`fastboot devices` on Linux gives no reply (I have tried running it as root)
On Windows the device doesn't pop up …
-
Model:SM-G5108Q
I add its model and qcom,msm-id/qcom,board-id to "msm8916-samsung-r08.dts" to build.After flashing "lk2nd.img" ,it stays at Odin Mode and says "cannot do normal boot".
But after …
-
-
After checked the dtb generated from stock dts, found it ignores the '--dt-tag "htc,project-id =
-
Using the command mentioned:
```
make TOOLCHAIN_PREFIX=arm-none-eabi- msm8916-secondary
```
And here's the version of the toolchain and dtc:
```
$ arm-none-eabi-gcc --version
arm-none-eab…
-
The kernel actually success to boot up, but on my device, display not working and didn't show any interface except a black screen.
Is there anything that need to do on display panel dtb?
Thanks …