-
I've been going through the learning curve on setting up a DIY plasma table and I'm using the protoneer v2.58 board. I'm having trouble figuring out which input on the protoneer board to use for my e…
-
ZEROBEAST firmware. HELP!
I cannot get the MMU2 to work reliably, so just updated with the latest 2.1.6-TZB-2378 printer, and 2.1.6-278 MMU firmware. Trying to go through the calibrations as shown on…
-
I have an issue to discuss.
Even if I don't believe there is all fine in the Modelica.Mechanics.MultiBody which we often take as a reference, I would suggest to rename package 'Sources' to 'Forces' an…
-
Hi, first of all thanks for this great library, great coding here.
I have some questions / suggestions.
I noticed an undocumented option when looking at the library > relSpeed.
I assume an intend…
djamu updated
5 years ago
-
Hi all,
I have recently acquired a used Eleksmaker A3 Pro. The machine seems to be functioning correctly. However, I am seeing some distortion when burning a vectorized version of an image.
This…
-
It's a mistake to create a private syntax for a configuration file when there are existing, perfectly fine formats available that are well understood and have publicly available parsers.
-
Due to no nose gear, so the turning is only using difference break. and due to left turning tendecy, the plane is very hard to maintain in a line. and very hard to turning on ground.
-
Hi,
Would it be possible to sync SE relative parameters for which there is no weighting coefficients for edges? Or what should we set for the weights in case we do not have these information?
Ac…
-
```
2019-04-05 16:41:15.731 ERROR : Failed to load add-on: zwave-adapter
Checksum failed in package zwave-adapter: openzwave/config/manufacturer_specific.xml
```
-
I installed the newest version to try out the tm1638 function. Unfortunately, I always get the same topic on console and mqtt whatever button I press.
I can set different switchmodes to each button, …