-
Hi,
there is currently an issue with a software called the "Nanoleaf adaptor for ioBroker" that uses this library for handling UDP multicasts. Unfortunately, here on my system it didn't work as exp…
-
after using Wireshark i found KNXD always sends all KNX/IP Multicast packets with a TTL of one.
Is there any way to change this, I couldn't find an option? My KNX/IP router uses 16. I use a routed …
MGKQB updated
10 months ago
-
I have some requirement about discovery my server from different segments.
My Server(device) is hosted on Segment 192.168.2.x.
My Clients(Software) is on Segment 192.168.1.x.
Clients can only d…
-
[https://openwrt.anycast.xyz/releases/22.03.0-rc6/targets/rockchip/armv8/openwrt-22.03.0-rc6-rockchip-armv8-friendlyarm_nanopi-r4s-ext4-sysupgrade.img.gz](https://openwrt.anycast.xyz/releases/22.03.0-…
f4nff updated
2 years ago
-
panic if no route available:
```
$ go run ./test.go
panic: runtime error: index out of range [-1]
goroutine 1 [running]:
github.com/google/gopacket/routing.(*router).RouteWithSrc(0xc00011c12…
-
# Description
Speed up Harmony's transaction finality time from 2 seconds down to 1 second by implementing networking upgrades outlined in harmony.one/networking.
## Context
topics to explore…
-
Felix is incorrectly removing the directly connected route when it detects that an IP address is deleted even if there are additional addresses in the same subnet on the interface.
This is causing …
-
### Description
I suppose these issues can be solved only by command/extraction version, https://suzieq.readthedocs.io/en/latest/service/service-format/#version but this is not introduced yet.
T…
-
Many phones set their WiFi drivers to deliberately drop incoming broadcast packets (eg, while the screen is off due to inactivity, the phone does not want broadcast traffic to keep waking it up), so w…
-
# scalecube-events:
Motivation:
When a service needs data owned by another service, there are two main strategies to obtain the sought data:
1) A service can ask for the data from the service t…