-
I tried to upload the [mic_serial_plotter.ino](https://github.com/Seeed-Studio/Seeed_Arduino_Mic/blob/master/examples/mic_serial_plotter/mic_serial_plotter.ino) to nRF52840 BLE Sense without Seeeduino…
-
Hi,
I am trying to use BlueMicro_BLE with Seeed Studio XIAO nRF52840.
The Adafruit BSP for the XIAO nRF52840 is available in the [Seeed-Studio/Adafruit_nRF52_Arduino](https://github.com/Seeed-St…
-
Hi,
I am using nRF52833, but when the family is set to NRF52, header file nrf.h sets to NRF52832 in line 93 and I cannot use GPIO over 32 (P1.x):
#if defined (NRF52)
#ifndef NRF52832_XXAA
…
-
Need to have:
- Reset switch to clear things like bonding details
- Don't use the nrf52 power output to supply the RTC, the RTC can handle voltage as low as 1.1V, have both use directly from the t…
-
I am using nRF52840 dongle with raspberry pi 4 to create a thread network. I downloaded nRFconnect for desktop to flash the hex files into the dongles.
I successfully flashed two dongles, but toda…
-
The nRF52840-DK framework does work correctly with the dev board. The variant.cpp does not match up with the pins on the board. Also the nrf52840_dk.json makes a call to the nRF52DK variant which is a…
-
### Platform
NRF52, ESP32
### Description
Request making the default for MQTT to 'ignore MQTT' and maybe even set hop count for inbound MQTT packets to zero, if that is possible. The core issue her…
-
### Description of defect
This looks a lot like issue #339, which I'm not sure was resolved. I've updated here with any new details:
The BLE_GattServer_AddService example compiles ok. However …
-
-
Arduino 33 BLE - ColorPalette.ino doesn't compile
error: 'digitPinToBitMask' was nor declared in this scope
/tmp/074269899/custom/FastLED/platforms/arm/nrf52/clockless_arm_nrf52.h:63:55: error: 'n…