-
### Link
https://www.aliexpress.com/item/1005006395402636.html
### Database entry
{"id":66,"type":"EndDevice","ieeeAddr":"0x0ceff6fffe4bdda2","nwkAddr":39698,"manufId":4098,"manufName":"_TZE200_lvk…
-
In this issue, we will discuss the appropriate content for the **first module of the WebAPI, About page** (As a reference I called it **About_1**).
Please share your thoughts on that.
![LDAR_Si…
-
Hello Together,
I have a Simrad GO7 XSR Chart Plotter..... and I have two nodes created by my own on an ESP8266....
1st is sending a Heading Signal
2nd is sending Humanity and Teperaturs
Str…
-
Hello
I became aware of the project here through a note in the HomeAssistant community. My Lambda is still coming, but I'm already interested in the possibilities and have the following question. Is …
-
### Version
1
### DataCap Applicant
zklion storage
### Project ID
1052
### Data Owner Name
Earth Observatory of Singapore, Nanyang Technological University
### Data Owner Country/Region
Singa…
-
Hi Ted,
Just did a highspeed run on the Autobahn. Water and Ambient Temp was displayed correctly.
But Oil readings were rubbish. 177 degrees celsius (!), next moment 235. Switched back and fo…
-
I use a ESP32 and this adapter (https://www.amazon.de/dp/B0BNQ41QKQ) and yaml:
```yaml
substitutions:
devicename: "esp32-eta"
fn: Heizung
esphome:
name: $devicename
friendly_name: $…
-
As a geologist I measure the orientation of geologic features in the field as part of a standard geologic mapping workflow. Currently, I measure geologic features with a compass or separate app and ma…
-
Hi just wondering if you had considered ESPHome support for this module. They already have CT Clamp Support so would just need some way of working with the multiplexer.
-
Have you developed a spec fopr the shield that goes with code? I'd like to build an arduino based EMS and pyEfis for display. This will go in my VW powered Sonerai