-
```
With an extra VCC line, the lifetime of OLEDS can be extendend.
Init sequence needs an extra command to enable this (U8G_ESC_VCC(1))
Howerver, the functionality (u8g_SetVCC()) is not yet implement…
-
```
With an extra VCC line, the lifetime of OLEDS can be extendend.
Init sequence needs an extra command to enable this (U8G_ESC_VCC(1))
Howerver, the functionality (u8g_SetVCC()) is not yet implement…
-
```
With an extra VCC line, the lifetime of OLEDS can be extendend.
Init sequence needs an extra command to enable this (U8G_ESC_VCC(1))
Howerver, the functionality (u8g_SetVCC()) is not yet implement…
-
Hi there. Could anyone please help me to make this code work with a "Grove SSD1315" 4-pin display? Nothing is showing up on the OLED display after uploading the code. Thanks in advance.
-
Hallo,
Ist es möglich das TFT komplett auszuschalten ?
Es wäre super wenn man es konfigurieren könnte das es z.b. von 22:00 bis 6:00 uhr aus ist.
wenn das komplett ausschalten nicht geht dann v…
-
I assume that the OLED Auto off function has the main purpose of saving the OLED display from burn-in?
And I know the timer can be adjusted and even turned off ("Never").
I sometimes keep my goggl…
MrMap updated
2 months ago
-
I've looked everywhere in this repo and can't find a part number for the OLED display. Makes sense it wouldn't be in the BOM (that just specifies the connector to the OLED), but the schematic doesn't …
str4d updated
8 months ago
-
Hi,
Can you please add some blocks to use the gfx library for the OLED ssd1306?
This following code works for me once the gfx.py file is loaded
```
from machine import Pin, I2C
import ssd13…
-
@VonSzarvas - Is this still an issue in the latest firmware, or was it already fixed?
> OLED's previous display is left intact and appears on-screen upon a reboot until the Propeller App is loaded _…
-
I've successfully flashed my code for the SSD1309 display, but it's showing irregularities in its output, as depicted in the provided image.
I'm using ESP32-S3-MINI-1
![Display_image](https://gi…