-
I have an SSD1325 OLED display, which according to the data sheet can handle (16) levels of grayscale. This is not entirely clear to me because the original u8glib could control 4 different shades of …
-
Board information:
(sysname='GPy', nodename='GPy', release='1.18.2.r7', version='v1.8.6-849-df9f237 on 2019-05-14', machine='GPy with ESP32')
I am actually using the G01 module on a custom board. …
-
Hi there,
first: thanks a lot for this great library which saves a lot of space, too.
Using a 128x64 0.96" SSD1306 OLED, I wonder how I could have 3 lines with text as large as possible. If I se…
-
Hi!
I am currently working on a project for the Arduino Mini, with an OLED display, RGB LEDs, and a HC-SR04 Ultrasonic sensor. I am currently troubleshooting the code on an Arduino Uno, before upload…
-
Hi
I connected DHT31 temp & humidity sensor via i2c (using pin 21 & 22) but it won't work when OLED is initiated (display.init(); ) - I get NaN from DHT31. When I comment out display.init(); sensor w…
kovir updated
5 years ago
-
It's a low priority from the standpoint of required sensors, but I'm wondering if we can support OLED displays in the library... for demos, testing, training, etc. Not sure how to handle which values …
-
Is it possible to rotate the screen. i.e. have it 180 degrees?
-
When running pi_logo.py from the examples I get the device info but the screen show for 5/6 static noise and only showing from the top a part (1/6) of the raspberry pi logo scrolling right to left?
I…
-
Hi Dominik,
I got luma.oled running on my rpi with an sh1306 i2c oled display.
Running the sample code from the luma.oled project works without a problem.
As I am more an interested user than a…
-
Hello, first of all thank you for your work.
I am having issues tho, I have it all compiled and flashed to my ESP but I am not able to show anything on my screen.
I am only using 1 screen which is C…