-
This was brought to my attention in https://github.com/home-assistant/core/issues/101518.
By sending commands (e.g. `SC`) from the ESP firmware to the OpenTherm Gateway directly, some unexpected data…
mvn23 updated
7 months ago
-
OpenThermMessageID::ASFflags:
flags = (response & 0xFFFF) >> 8;
vars.service_required.value = flags & 0x01;
vars.lockout_reset.value = flags & 0x02;
vars.low_wa…
-
Hi, thanks for this fun project! I've just built some rev. 4 boards. And I'm testing with two WeMos D1 R2 boards and an Arduino Uno. For all boards the power supply test, interfaces test and self-test…
-
**Describe the problem you have/What new integration you would like**
Please add support for eBus protocol used on various heaters/boilers like Vaillant or ProTherm brand. It needs voltage shif…
lwqcz updated
3 months ago
-
Hi,
I wanted to know if other people had connection problems with the BDThermostatHA and De Dietrich boiler.
I've read the issues that Remeda has changed its API, it is maybe the case for DD ?
A…
dijbi updated
10 months ago
-
Hi Ihor,
I recently bought one of your shields, thanks for your effort.
Sadly, it seems that setting the DHW, or hot water temperature, does not play nice with my boiler.
This seems odd as this i…
-
Loads of error messages a day in the Home Assistant log
02:246902 = Master Itho Daalderop Autotemp
02:246873 = Slave Itho Daalderop Autotemp
02:248278 = Slave Itho Daalderop Autotemp
Autotem…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
I feel like I'm missing something quite obvious, but I've searched the documentation on both this site and the original OTGW, and nothing seems to add up. I've got a NodoShop OpenTherm gateway connect…
-
Hi, are you considering support for an ESPHome module?
This would increase your potential market by a lot...
Thanks!