-
### The problem
pyotgw has the function set_max_ch_setpoint, but this does not appear to have been exposed as a service in opentherm_gw integration. Would it possible to expose this? Alternatively, …
-
I have an OpenTherm Gateway from November 2021 with a wifi module (NodeMCU ??) and I would like to update it with the latest firmware. The process is not completely clear to me and I have some questio…
-
### The problem
the setpoint override service does not function properly with PIC firmware 5.6 and above. In fw 5.6 the CS-command expiry timer is 'fixed'. PIC documentation states : "A CS command wi…
-
### The problem
the hvac_modes property is empty, it should contain (at least) the heat value to indicate this integration is able to control heating.
for example an airco unit has these:
hvac_mo…
-
### The problem
seeing below error in logs after updating to September beta and restarting consistently
`number.opentherm_domestic_hot_water_setpoint` no longer being available
### What versi…
-
Hello, HA 2024.5 stops the integration from receiving updates unless I deactivate all my devices and activate them again one by one each time HA restart.
My devices are
- thermostat, category : …
-
### PROBLEM DESCRIPTION
Sonoff devices after upgrade to Tasmota 12.0.2 reboot every ~20 minutes with StatusSTK":{"Exception":29,"Reason":"Exception","EPC":["40252ca8",...
### REQUESTED INFOR…
-
### The problem
When you call
SERVICE OPENTHERM_GW.SET_CONTROL_SETPOINT with a value other than 0 the boiler start the cental heating as expected.
unfortunatley this last just a couple of minu…
-
Is there an example of how to use the set_opentherm_parameter service and what is possible using it?
-
Please see [this](https://community.openhab.org/t/opentherm-gateway-binding/39160/331) post on openHAB Community forums.
When attempting to set the thermostat clock using the `SC` command, the foll…