-
After installing PPPwn_ow using commands (online) from readme, uhttpd service is not starting after reboot.
This means that LuCI and pppwn.html are not accessible, also power led is blinking every 0.…
-
As soon I I start up this container I start having issues access the internet and other IP cameras (non-wyze) start to intermittently go up and down. I stop the container and everything goes back to n…
-
### Describe the bug
In master snapshot images (for different device platforms, e.g. ipq40xx, ipq806x etc.), a STA/client can never get any IP address from the uplink if an AP is configured and en…
-
### Describe the bug
With master snapshot images (kernel 6.1 or 6.6) for Meraki MR52 / MR42, none of its WIFI radios is detected and no WIFI firmware is loaded.
MR52:
[ 7.816426] pcieport 00…
-
My home network topology is like this
NanoPi R2S -> Archer C6 AP -> D-Link Repater AP
NanoPi R2S does routing and the Archer and repeater are setup as dumb ap. So for mesh I installed the necess…
-
version: OpenWrt 21.02.3
kernel version: 5.4.188
my board have three PCIe device, just can use first 2 device, third device cannot detected
```
[ 1.298144] rt2880-pinmux pinctrl: pcie is al…
-
### Describe the bug
/etc/config/wireless have both radio0 and radio1 set to band "5g".
iw phy phy0 info shows support for 5GHz .
iw phy phy1 info shows support for 5GHz AND 2.4GHz.
DTS at: targ…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [是的 ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A：启动时日志报错，然后重启。也偶尔能正常启动，但只能坚持几分钟或在WEB界面做一些操作之后也会再现故障自动重启
关键日志： Unable to handle kern…
-
### Creating an image request
#### Formal device information
- Device name | Orange Pi Zero 2W
- Official product URL | http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-a…
-
I finally got in contact with a living person at Philips/Versuni helpdesk. My device is connected to wifi, but the app would say "not connected". I just wanted to give you the contents of these mails…