-
Could anybody chime in and help me learn how to access the PWM function on Pin5 or any of the other capable pins? I have coded a project using SPI and I2C but want to add an IR emitter at 37KHz. Can a…
-
Hello I am using your code for a Stepper Motor but at the moment of link with Adafruit the next message appears: AdafruitPwm: writeRegByte to 0x35 failed: android.os.ServiceSpecificException: I/O erro…
-
Hi Thiago,
i just realized that the call of a single pwm_controller function block will trigger the creation of all possible PWM_Instances.
So all possible pwm pins are reserved for pwm, even if…
-
How do you synchronize 5 different PWM channels (3 slices) so they start at the same time?
-
I notice that this repo dose not allow for DMA transfers to the TimX devices.
I recently followed https://stackoverflow.com/questions/63016570/how-to-make-dma-work-for-changing-the-duty-cycle-of-a-…
-
I setup some config with WeAct Studio STM32F405RGT6 Board but motor 4 (PWM) does not work. I tried with 2 boards and also probed the signal with an oscilloscope but not signal is shown.
It would…
-
hi, my name is Ahmed, and I'm working on a Pixhawk with a raspberry board,
I developed a PID tuning loop on Simulink that have as output the PWM signal for 4 motors
I want to use the DroneKit -pyt…
-
GEVCU5 boards are capable of PWM on the outputs but there is currently no support for this functionality in software. It would be nice if it were possible to set up a PWM map on the GUI interface that…
-
I'm working on a project that requires some more PWM capable pins.
I'm going to try software PWM over shift registers. I'll submit a PR if I can get it to work.
Maybe with an API like this, wher…
keyeh updated
7 years ago
-
| | |
|:---|:---|
|**_F´ Version_**| |
|**_Affected Component_**| |
---
## Feature Description
Add a PWM manager for the specific rotor that we are using in the system reference. The manager …