-
Something of a dupe of #6 except it's a different approach.
Might be handy to have an addendum at the bottom of the page, a small table that covers these additional pins and their functions. This c…
-
Hello Mr. Stephen
First of all, thanks for this well-prepared and comprehendible repository. I've been on working on a heli project and I need to read rpm value from my pixhawk. I want to read the …
-
When using single precision float, `sin(x)` and `cos(x)` (and possibly `sincos` and `tan`) are accurate for `|x| < 128` (here, `|x|` means absolute value of `x`) but show increasing error as `|x|` gro…
-
### Description / Steps to reproduce the issue
I cannot build the telnet configuration for the Pi Pico W following the [documentation from the NuttX website](https://nuttx.apache.org/docs/latest/plat…
-
I have wondered about using the rp2040 chip with IP networking, but using the UART ports (or usb-serial, the recent PIO-based Ethernet MII interface, or even USB-CDC/ENCM) rather than the CYW43 device…
-
Is it possible to load new files into littlefs over an API/web page and save them and reset or are they locked?
-
I saw this PR https://github.com/raspberrypi/pico-sdk/pull/504/commits/6e6cb52192b3a9455d0714e606633d82283062b4 and some discussion in issue https://github.com/raspberrypi/pico-sdk/issues/500.
It …
-
Windows, Ubuntu, ARM, RISC-V (riscv32-corev-elf or riscv32-unknown-elf) same errors. For just blink:
```
PICO_SDK_PATH is E:/Download/Pico_2/pico-sdk-2.0.0
Target board (PICO_BOARD) is 'pico2'.
Us…
-
Looks like it can't see FreeRTOS sources.
Похоже, что он не может найти исходники FreeRTOS. Делал все по инструкции.
```
/mnt/d/linux_files/build/murmulator/murmulator-os/drivers/usb/usb.c: In fu…
-
I've built a functional toolchain for Win64 / Pico 2 / RiscV-Hazard as per https://github.com/Wren6991/Hazard3/issues/16
The toolchain tests out fine and I can build a uf2 and stick it on a Pico 2 …