-
**Describe the bug**
At after clicking on 'Confirm and run' at step ''Unlock the bootloader', the device reboot in download mode without the option to unlock the bootloader.
**To Reproduce**
Step…
-
- /e/OS do it
- IodéOS do it
- FlameFire's Unofficial LOS ROM for lilac does it
Can we use one of those approaches with our builds so that they pass SafetyNet?
-
momo_@LAPTOP-RHC9TS9O MINGW32 ~/esp/esp-idf/examples/get-started/hello_world
$ make flash
GENCONFIG
App "hello-world" version: v3.3-beta1-223-ga62cbfec9-dirty
WARNING: Toolchain version is not sup…
-
### Board
ESP32-S3-WROOM-1-N16R8
### Device Description
Plain module ESP32-S3-WROOM-1-N16R8 in a custom PCB.
### Hardware Configuration
GPIO 19 and 20 are connected to a host USB (PC or…
-
I'm using Genesis Plus GX to emulate the Sega Master system. I have also enabled the feature of using an original bootloader rom before launching every rom.
The first time I launch a game, everything…
-
This *may* be related to my first attempt not having system.img properly put into the correct directory.
[*] Power off the device, press ENTER, and then plug the device in:
```
MTK Flash/Exploi…
-
Hi,
Been playing with this great piece of work, however ran into a small problem. While the flows work perfectly , except for some errors in xsbug, the dashboard dont appear on my m5stack fire and …
-
hello
The program and xsbug will no longer be able to communicate on Windows.
It was probably used until around November.
The esp32s3 devices I have confirmed are esp32/m5atom_s3 and esp32/m5dial…
-
```
======================================================================================
Hold your breath: updating the Kernel, the Linux filesystem, the bootloader and stuff.
Stopping this will …
-
The decision on which bank to load the new firmware to, is based off the REMAP flag, which is correct. The remap flag tells you which flash bank you're running from.
However, the decision to set BF…