-
Hello, great project. Please could you indicate more specifically the configurations, connections and hardware necessary to be able to debug when a key is pressed. Thank you
-
After 100+ hours messing with ZuluSCSI 1.2 obtained from Rabbit Hole Computing. random watchdog timeouts persist. My memory card (32gb) was purchased from Rabbit Hole Computing at the same time. The s…
-
As below, I seem to be unable to copy any files to the device.
Also, even setting the --buffer-size=128 gets ignored and the 512 USB default is used.
Files are created with zero bytes, I also tr…
-
**Describe the problem you have/What new integration you would like**
I would like to see MQTT client support for ESPHome on the Raspberry Pi Pico W platform.
The existing MQTT client only…
-
First off, thanks for this crate!
I'm trying to decode a signal of a generic "Car MP3" remote, which apparently uses the NEC protocol.
When using the NecDebug protocol type, I always get the same …
-
Are camera modules v3 supported?
-
Just tried to run with clone RP-2040 Zero, got 3 attepts to boot and then blink red green
I have softmoded hdd or something, will try with clean one also and then with Waveshare RP2040 or Raspberry P…
-
Please could you add support for the new [RPi Pico (RP2040 MCU)](https://www.raspberrypi.org/products/raspberry-pi-pico/)?
It is a Cortex M0+ chip but I don't think any of the existing platforms co…
-
- Hardware description: Rasperry PI connected to RP2040 nano connect
- RTOS: NA
- Version or commit hash: Humble
Hello again,
I am running uROS on a RP2040 connect. As usual, for testing I am …
-
Currently for some ports and some audio play mechanisms, there can be clicks at the beginning and/or the end of a sample due to sudden level shifts. We have support for quiescent values but these are …