-
**Describe the bug**
```
rpi_zero:~# gpg-tui
failed to initialize clipboard: XcbConn(ClosedParseErr)
[Nothing is shown - q closes program]
```
**To Reproduce**
run gpg-tui over the UART …
-
Hi Mwyann,
I'm reaching you as I found your work on PSAKEY.
Have you ever tried to make a simple Wifi Hotspot with your CDC_EEM Usb Key (based on a RPI Zero) ?
Such hotspot would allow to easily…
-
If you have the choice of using a Pi Zero 1 W or Pi Zero 2 W, go for the Pi Zero 1 W.
The problem is the wifi. The Pi Zero 2 generates an interference signal when output via the HDMI, which causes th…
-
Hello everyone,
I've got a HUB75E on a pi zero W.
I did the trick to avoid flickering (soldering on the bonnet) but even if the main flickerings have gone, there are some very annoying (black bars…
-
Is there a quick way to tell which clients are connecting through the Raspberry Pi AP extender?
I’m using this on a RPi Zero W and so far so good. Thanks for the code and tutorial.
-
Would it be possible to provide support for the RAK7246 gateway, which is a Raspberry Pi Zero W with a RAK2246 (SX1308) concentrator.
Currently building fails with
`setup.gmk:65: No toolchain for …
-
I have a Raspberry Pi Zero 2 W ("Pi Zero") and tried to boot it with the image [gentoo-pi-2021-01-01.img.bz2](http://www.gundo.com/gentoo-pi/gentoo-pi-2021-01-01.img.bz2) procured from this project …
-
Upload a file called "xyz.ctb"
Delete that file.
Upload another file called "xyz.ctb"
RESULT: File will not upload until you refresh the page.
CI build of Mariner3D from about 5 days ago(?) on R…
-
### Description
When using Raspberry Pi Zero 2w with latest Bookworm aarch64, there is error in the log:
```
[ 13.193367] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chi…
qrp73 updated
3 months ago
-
Hi Rene,
Yesterday I noticed that two different PI Zero 2 W PCBs can have different WLAN hardware: These logger lines exist on different Pis:
`wlan: ether4330: chip 43430 rev2 type 1` (my Pi)
`wl…