-
branch v5.8.7
kernel 5.14.0
ubuntu 20.04
```
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda Prod…
-
Hello, this is a side issue from another issue:
https://github.com/RinCat/RTL88x2BU-Linux-Driver/issues/165
To re-cap:
CONFIG_PLATFORM_SUNxI was not compiling because of mach/sys_config.h missi…
-
The first problem was:
> wash -i wlan1
> [X] ERROR: pcap_activate status -1
[X] PCAP: generic error code
couldn't get pcap handle, exiting
Problems solved by comment https://github.com/t6x/re…
-
## Box 1 (with rtl88x2bu):
```
root@ubuntu:~# iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"ibss-test" Nickname:""
Mode:Ad-Hoc Frequency:2.452 GHz Cell: E6:B9:25:CB:5C:B6
…
-
On Raspberry Pi 4, I can build and install the module rtl88x2bu/5.6.1 with dkms using the steps described in the README.
But when I perform `sudo modprobe 88x2bu` to load the module I get this erro…
-
Hi Nick (if I may),
first of all, many thanks for this driver. This is the best and most stable driver for my card. I have no problems, but the speed is slower in comparison with the same card unde…
-
I followed the instructions that you provided for Ubuntu. The driver seemed to install correctly. The wifi adapter LED is now blinking and it is able see available wifi connections. The problem is tha…
-
Hello friends...
Please someone can help me?
Actually i did all to try to install this mot*** drive to work on my kali linux...but i did not have success...
When install not find any network …
-
Good Morning,
Granted this is not an issue with the code you've provided, still hoping you have an insight to offer.
I've built a platform for Android 5.0.1 on ARM within the Makefile:
```
C…
-
Or it will connect and disconnect forever.