-
Hello,
Has any received an ESP32 NOT FORMATTED issue on their screen after powering up? I'm not too sure where this message is coming from. I have a formatted SD card with firmware_rev_6.bin on i…
-
### Describe the bug
While running ./scripts/pi-setup/auto-install.sh getting below error:
Some packages could not be installed. This may mean that you have
requested an impossible situation or i…
-
I think Windows might struggle with files that are empty have a size of 0 bytes? I notice this only happens when editing the SD card directly. Might just be my computer/SD reader so worth a double che…
-
Hi,
I have a problem starting the Mini SS Main Board for CM4 Lite system.
Indeed, the system does not boot on the SD card with the error message "failed to open device sd".
I tried with several …
-
## PROBLEM :
The kit is set to SD mode and collects data properly. Next, the kit is left to run using its battery until it completely drains out and the kit is off.
Next, charge the battery and …
-
## **Is your feature request related to a problem? Please describe.**
Some users would appreciate an SD card Hex to human-readable text file for Cyton created files.
Maybe the files should look li…
-
### Describe the Issue (If applicable)
When using "Switch to SD2 for Roms" as described in https://github.com/christianhaitian/arkos/wiki/Frequently-Asked-Questions---RGB30#q-how-do-i-make-use-of…
-
Hi,
I need T-RGB to work as slave with Raspberry PI (PI as a master)
But I need one single output pin on T-RGB as an interrupt for communication slave->master (to trigger RPI to read slave)
I d…
-
I couldn't get Windows on Go to boot on an SD card using rEFInd GUI installation. However, I was able to solve the problem.
Problem description: I could boot into Windows via the Steamdeck BIOS, an…
-
current code says that SD card does not share
```
// We intentionally never unlock in case of success, we take exclusive access of that spi device for SD use
return reinterpret_cast(&MMCD1);
`…