-
Dear sir/mam,
I have flashed the sdio binary files into wifi module on my PCB board.
I have inserted the driver but esp_probe function is not calling.
Log of host side: modprobe esp32_sdio.ko …
-
Hardware: SAMA5D4Xplained dev board + ATWILC1000-SD (rev 4) dev board
Software: wilc_demo 15.2RC1 from:
https://github.com/linux4wilc/wilc_demo/tree/009b36048d18ffb64b2140eeecd0194cc21cbfd4
```…
HDC67 updated
4 years ago
-
Hello,
We are working on iMX8 Quad Max custom board with Kernel BSP version **4.14.98**. But we are facing WILC3000 WIFI Chip ID detection issue.
Device tree binding:
```
&usdhc3 { /* USDHC3…
-
Your Gentoo RPi3 image is working great but when I built the Gentoo for my RPi3B with musl, install your overlay, build the kernel with https://github.com/sakaki-/gentoo-on-rpi3-64bit/blob/master/conf…
-
I've extracted rom.bin from the WIFI chip, but I don't kown whether it is so-called clean. I have tried to applied flashpatches to the ROM file using the fpext utility but failed. So I use IDApro to d…
-
Hi
Is there any soloution for port ESP-hosted-fg to SDMMC protocol?
-
kernel NULL pointer at wilc_wlan_txq_remove_from_head+0x58/0xd4， which cause hang while doing iper3.
I use WILC1000-SD wifi module insert to NK-NUC980 EVK Board SD1 slot(新唐) uesing this github dr…
-
COLLECTING STATISTICS read /home/pi/nexmon/STATISTICS.md for more information
COMPILING src/version.c => obj/version.o (details: log/compiler.log)
GENERATING LINKER FILE gen/nexmon.pre => gen/…
-
Hi guys, we got problem while using **BT RFCOMM** server in esp-hosted-ng:
- RFCOMM connection broken after transfering some data.
- The next RFCOMM connection can't setup after last connection b…
-
*p3x-robot:*
Supply the following if possible:
* Device problem occurs on
* Linksys WRT 3200ACM
* Software versions of OpenWrt/LEDE release, packages, etc.
* All releases (trunk, stable)
*…