-
### Reproduction steps
1. Build a Linux Flow sensor device
2. Pair it with iOS
3. Flow sensors is not supported on in 17.0.3
1. Build a Linux pump device
2. Pair it with iOS
3. pumps is not …
lboue updated
3 weeks ago
-
### The problem
Some platform: statistics sensors will trigger a repair cal…
-
Use the optical SMTP system, then you can copy the virtual port!
-
Dear Smartavan Team,
This is rather not an issue but a question, and I hope that you don't mind that I put it here.
According to [Fabian's documentation](https://github.com/Fabian-Schmidt/esphom…
-
### The problem
Hi I have one esp32 device with two dallas temp sensors connected to it. All has been working fine for weeks. Today upgraded to 2024.9.0 and both sensors stopped sending data. I have …
-
Hi! I faced an issue with MUST PV18-3224 VPM.
The Accumulated charger power sensor does not provide data of the energy given on the battery
I have this sensor in the ESP config:
```
- platfo…
-
Im still getting unknown after installing and setting up the below sensors on monday.
Not sure whats happening.
`
- platform: p2000
name: P2000 Ambulance
regios: 4
discipline…
-
Hello,
I am currently trying to make my Flexispot ED5 smart with the help of an ESP8266 and this repo.
The ED5 comes with the following control box:
![IMG_20240531_135401.jpg](https://github.com/us…
-
### Description
The OrientationSensor.Default.ReadingChanged event does not fire on iPadOS, but works fine on iPhone. The data from the orientation sensor thus cannot be easily read.
### Steps to Re…
-
When switching the thermostat from 'off' to 'heat' the switch isn't immediately being turned on despite a high enough PID output.
According to the log the cycle time is too short, but with an o…