-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
Downloaded the ino file and attempted to push it to the Arudiuno, However I'm getting the subject error. Any thoughts?
-
Has anybody had any issues with L3 for "steering"?
It seems that when you let go of L3_left and right it takes a second or so to realise the state has changed and update.
It works perfectly fine…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
Instead of running a default min and max at 500 and 2500 for all servos
# define DEFAULT_SERVO_MIN_US 500
# define DEFAULT_SERVO_MAX_US 2500
How would I change this so...
pin 7 min = 300 and ma…
5andy updated
8 years ago
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…