-
[Figured it out]
[Sort of. I still don't have HTTPS working right.]
I have not been able to get HTTPS to work. Here is what I've done so far:
1) Install the Windows 8 Drivers from the botle…
-
is there any appetite to add a support for publishing data to Mosquitto? Been at it for days with no luck. Seems like every time I find libraries that support Mosquitto they conflict with the modified…
-
Hi,
I have a Waveshare SIM7000G module connected via USB to a Raspberry Pi.
I frequently send AT commands for HTTP Posts to the modem on /dev/ttyUSB2.
That works fine for a while until the mode…
-
I have had 3 boards die ( technically 4 but that was my bad, connected battery backward and poof it dead )
I am using an external battery back 3s3p 18650s that output ~11.1v, this is inputted into a…
-
I open your basic sample,
When i send regulat AT command, it works.
When i send http command, i get gibrish in the response.
The code i sent in console:
AT+CHTTPCREATE=http://www.iforce2d.net/…
roysG updated
3 years ago
-
Has anyone actually got the mqtt subscribe function to work?
The publish works fine, however if I set
```fona.MQTT_subscribe(SUB_TOPIC, 0); // Topic name, QoS```
and do this (example from an…
-
Hi,
I recently ordered a SIM7000A shield from Amazon. This shield is a "version 5" design and shipped with "B01" firmware.
None of the commands in the [HTTPS AT commands guide](https://github.c…
-
Hi, I've been using the module for quite some days now and it was working all fine.
Suddenly since yesterday the module doesn't seem to get a network connection.
I use the same SIM on my phone and i…
-
I got the SIM7000A up and running over HTTP(s) last night. It was a bit PITA but was self explanatory once you follow the documentation to a T.
I tested the code with pushsafer and pushover. Pusho…
-
My workflow for feeding opentsdb involves off-line processing of numerous log files and generating a single stream of importable data for 'tsdb import'. This data may not be ordered in time and this …