-
### Description
Can't connect to the printer over USB - E3 Mini v1.2 with compiled Marlin (see attached config.h)
### Steps to reproduce
1. power ender 3 on
2. plug in usb cable
3. pc, bo…
-
**Is your feature request related to a problem? Please describe.**
Please help me proof-test these examples Marlin configuration files for CR-10 and CR-10S that is submitted for upstream inclusion:…
-
I have an Ender 3 with an SKR Mini E3 v2.0 board and a 3DTouch (BLTouch clone) ABL probe installed.
I have been using the latest version of firmware from this official repository for the last few w…
-
Can someone tell me what could cause that?
Ender 3 freezes during printing in random moment. I cannot do anything, screen does not respond. When I checked micro SD card, files were gone (like the S…
-
### Version
2.2.0
### Operating system type + version
Arch Linux
### 3D printer brand / version + firmware version (if known)
Ender 3 + SKR Mini E3 v1.2 + Marlin 2.0
### Behavior
* There s…
-
Under linux, Cura 4.0 and 4.2 both have trouble connecting to the USB serial port. This manifests as a lock-up of the UI on the printer and a failure to detect the board in Cura. The permissions on /d…
-
Old information, scroll down to the part where the EEPROM causes issues.
```
> Executing task in folder Marlin-2.0.x-SKR-Mini-E3-V1.2: C:\Users\Philippe\.platformio\penv\Scripts\platformio.exe run…
-
Ive been using klipper for a while now but decided to switch back to marlin for some features id like to be supported. When I load the SD card with the "firmware.bin" file it doesnt do anything. If I …
-
Hi
I installed a BL Touch (from Antclabs) and the Micro Swiss Direct Drive Extruder Setup. Now i need to change the #define X_MIN_POS and #define Y_MIN_POS to #define X_MIN_POS -5 and #define Y_MIN_P…
-
### Description
The serial number of the SKR E3 Mini V1.2 board is reported as 0. This makes it impossible to write a udev rule to guarantee the device location when plugging multiple boards into o…