-
**Printer type** - XL 5T
**Printer firmware version** - 5.1.0-alpha2
**Original or Custom firmware** - Original
**Describe the bug**
Summary:
A false positive 17255 modular bed error is tri…
-
**LG Air Conditioner Model**
Please provide your A/C model here. If the unit successfully paired to Homekit, please also include the "Model" listed in the accessory's settings.
Model: WIN_056905_WW …
-
Hello,
(I didn't know where I should post, so feel free to merge with the relevant subject if there is one in particular, maybe in the discussions, I don't know.)
I bought a dozen of these TRV (on A…
-
In colder climates the printer (MK3) powers up and goes to error min bed temp. After heating the bed with a hot air gun it clears to hot end min temp and after a little heating so does the hot end. I…
-
As the battery runs low / out of power, the valve completely opens/resets. I struggle reliably testing this, but noticed it with two TRVs which were turned off, they completely opened. My suggestion w…
-
### What happened?
zigbee2mqtt throws an exception when trying to configure my Aqara Smart Radiator Thermostat E1.
Yesterday it was able to read values from the radiator but not write to it. Now,…
-
### The problem
Hi @cgtobi I’ve tried to contact you on discord.
I have an issue when I try to integrate the Bticino smarther thermostat 2 on home assistant. After several attempts I’m able to lin…
-
Hi,
It would be great to have a MQTT command, which disables/enables the control logic of SF-control.
My use case:
I want to keep my feed to the grid at max 800W (max-inverter-limit) at all times…
-
In order to keep an overview of which devices work with this integration and to get to know which functions they provide, I would like to start a list.
If you tried a device please just post
``…
-
My Home Assistant version: 0.97.0
My lovelace configuration method (GUI or yaml): yaml
What I am doing:
trying to display a custom:dual-thermostat as a popup while using custom:banner-card …