-
## 3.1.2
## Configuration
```yaml
H100 Hardware Version 1.0
Firmware 1.5.10 Build 240207 Rel.175759
T110 Hardware Version 1.0
Firmware 1.9.0 Build 230704 Rel.154531
```
## Desc…
-
**Is your feature request related to a problem? Please describe.**
I bought 5 ZigBee Thermostatic Radiator Valves but they are not recognized properly in ZHA.
Running ZHA with conbee II stick
**D…
-
### Bug Description
I have Alexa integration (node-red-contrib-virtual-smart-home) configured in Node-RED which was started when network was not established with ISP. When the network was established…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Problem description
1. Create a _Spreadsheet_
2. Create a sketch with _PartDesign_
3. Close _Sketcher_ tab.
…
-
### Description
I have a smart gridmeter that I can read with Home Assistant so I was trying to find a way to control the max output of the Growatt solar inverter without buying this device --> https…
-
Hi,
Feature request.
Given that power in motorhomes is at a premium, would it be possible to port this project to run on an ESP based low power board? IT would also help since Pi's are pretty rare i…
-
Researching on that
- https://shop.nuki.io/en/access-solutions/smart-lock-3-pro-black-euro-profile-cylinder/ -> home set pro bundle? 379e
- https://shop.nuki.io/en/add-ons/nuki-door-sensor/
- htt…
-
Hello,
First let me thank you for the amazing project, it seems like just the perfect solution for me. Also, let me apologize, because this is not exactly an issue, but a question.
I'm using home as…
-
### The problem
Genius Hub plugs used to appear as a binary_sensor which showed if it was on or off, and a switch which allowed the plug to be "boosted".
The binary sensor is no longer created as …
-
The following code will let me scroll the listview, but will not trigger the SmartRefresher to refresh or load new data. I'm using the GroupedListView dependency as its child, and I noticed that if I …