-
## Issue Description ##
issue with srsUE sometimes get stuck in reading data from RF.
did somebody tested srsUE with BladeRF 2.0 micro xA4 ?
if yes, wich versions of firmware, libbladerf, srsRAN
…
-
## Issue Description ##
We are trying to run RAN550 in 2x2 mode with srsRAN gNB, and experienced high loss and low values of SINR.
## Setup Details ##
- System: Ubuntu 22.04
- Working on i9-139…
aibtw updated
3 months ago
-
This will be a precursor to the machine learning model we will use for detecting jammers and jammed signals.
For now, it will consist on a simple "on" or "off" sequence where the ML model will learn…
-
I would like to know why adalm-pluto is not supported? Not only openbts, but also others such as srslte
What makes it not supported? Is it some kind of API or command interface that only the more exp…
-
Hi @herlesupreeth ,
I was just glancing at the project and stumbled across the `deploy-all.yaml` file...
Is this the NSA mode deployment of the 5G network or mixture of 4G-EPC and 5G-core? as it…
-
## Issue Description ##
I set up COTS UE connection I am not sure if it works, but in srsenb terminal I see connected message, but in srsepc there is message "DL NAS : Sending PDN connectivity re…
-
## Issue Description ##
Building Raspberry Pi OS (armv7) fails.
## Setup Details ##
Using raspios_lite_armhf-2023-05-03 (bullseye)
## Expected Behavior ##
The build succeeds.
## Actual Beh…
-
## Issue Description ##
I used srsue with USRP X310 and srsenb with X310. The UE is able to connetc to the eNB. But after less than a minute, it begins to say warning radio link failure and keeps…
-
I am trying to implement the zynq_timestamping solution by porting the existing implementation into ZC702/ZC706 + FMCOMMS5.
Having as reference the Block design of the ZCU102 and AntSDR, I managed to…
-
Hello everyone,
I am currently working on a project involving srsRAN gNB and srsUE. In this project, I am using a USRP B200 Mini on the srsUE side and a USRP B210 on the gNB side. I have successful…