-
SX1261: PRAM version: SX1268 V2F 2F06
SX1261: PRAM version: SX1268 V2F 2F06
ERROR: SX1261 PRAM version mismatch (got:2F06 expected:2D06)
ERROR: failed to patch sx1261 radio for LBT/Spectral Scan
-
I'm from India and I'm actually confused given the fact that there are only 3 channels configured in TTN and saw the same in [docs of this library](https://github.com/beegee-tokyo/SX126x-Arduino/blob/…
-
### Description of defect
The SX126X driver makes use of device, frequency and crystal select pins. These are present in the EVB but not in any target using a SX126X module directly. Ther…
-
I´m trying to install it on a RaspberryPi Zero W but Make get stuck on:
g++ -o LoRaPktFwrd RadioLib/src/linux-workarounds/SPI/SPI.cpp RadioLib/src/linux-workarounds/dummy.cpp RadioLib/src/protocols…
-
Hi all,
I'm testing the LoRa drivers included in Zephyr and through a logic analyzer I realized that the driver for the SX1261 is transmitting the opcode of the commands over SPI but without any pa…
-
Hello,
I've been trying to use the library with my STM32L4 in Stop2 mode.
I'm using a software 32bit timer with my LPTimer to make it work all together as you told me to in my last issue.
The pr…
-
I was trying to test Deep Sleep on the Wisblock RAK4631. The only way to get the power usage down to 24uA is to initialise LoRa and LoRaWAN. Is there a way to switch everything off without having to e…
-
I see you added ESP32 sleep examples, though ESP32 is not really designed for good sleep current measurements, is there any sleep examples for the nRF52832 and any current measurements done?
Thanks…
-
Hello,
I can't receive the join accepts. The ldl doesn't even get to the RX mode and instantly goes for a RESET.
I'm getting radio faults and interrupt faults. Maybe it has to do with the ticks …
-
I have a Dorji SX1262 (868) I can't make it work in RX mode. The TX is working "SX126x_Transmit.ino" using "lora.setTCXO(1.6);"
ESP32 with Dorji DRF1262 (DIO2 not connected)
My RX sketch (not work…