-
Hi All,
Is it possible to receive uplink and downlink packets simultaneously with the SX1301?
I have read "Receive unfiltered LoRa Frames", issue 29 in the lora_gateway git, and "LoRaWAN Gateway…
-
Hi All,
Is it possible to receive uplink and downlink packets simultaneously with the SX1301?
I have read "Receive unfiltered LoRa Frames", issue #29 in the lora_gateway git, and "LoRaWAN Gatew…
-
Can someone explain after set IOT_SK_SX1301_RESET_PIN as gpio output in line 30 and do reset, why it need to set as gpio input in line 37? Does it really necessary?
https://github.com/Lora-net/lora…
-
## Expected Behavior
In the US915 config, DR 5-7 are supposed to be undefined, as specified by the LoRa Alliance.
![image](https://user-images.githubusercontent.com/5247527/200592156-49…
-
Hi,
I'm trying to "detect" the LoRa board to provide a clean integration:
- detect if there is a LoRa adapter
- find the ttyACM associated to it
- start the basicsStation/package forwarder with th…
-
I am trying to communicate Raspberry Pi board to ic880A-spi over spi .At spi speed 1 MHz its working fine but at 8 MHz sometime its working or sometime not due to PLL lock lose
do {
i…
-
Hello,
I am trying to make the Basic Station send a beacon signal for class B devices. Based on [this thread](https://github.com/lorabasics/basicstation/issues/98#issuecomment-831204980), I underst…
-
If I reboot my Linux gateway and try running the pkt forwarder it hangs until I ctrl-c it then re-run it. Not to mention it always hangs when running as a system service or via crontab using the @reb…
-
```
packet-forwarder BALENA_APP=HELIUM-TESTNET
packet-forwarder DIAGNOSTICS_FILEPATH=/var/pktfwd/diagnostics
packet-forwarder AWAIT_SYSTEM_SLEEP_SECONDS=5
packet-for…
-
I've been through countless forums discussing the same issue, but with no luck.
I'm trying to setup the WiMOD Lite Gateway (Raspberry Pi 2 B+ and iC880A-SPI) with the lora_gateway, but without the…