-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
Jcc99 updated
5 months ago
-
I plan to use gemini instead of open AI but somehow when I run the app, it checking open AI keys. I already export (or SET in windows) the 'GOOGLE_API_KEY' key btw. In the setting I also had autogen f…
-
### Board
esp32 wrover
### Device Description
psram, eth, flash etc..
### Hardware Configuration
psram, eth, flash etc..
### Version
latest master (checkout manually)
### IDE Name
PlatformIO
…
-
### The problem
If i flash the firmware i can see it (the board not work with BME680):
```
[11:01:29][E][safe_mode:086]: Boot loop detected. Proceeding to safe mode
[11:01:29][E][component:164]: C…
-
Type: Bug Report
**Describe the bug**
- OS and Version: Windows 10
- VS Code Version: 1.87.2
- Extension Version: v1.83.0
- Target Device: STM32
- Other extensions you installed (and if t…
-
**Description**
I'm trying to get my product certified and the last test I can't pass is the TC-SC-3.6 test, which tries to establish different PASE Sessions (3) for each Fabric.
The problem i'm f…
-
I was able to flash Canboot onto the SKR V1.4 using a raspberry pi connected to the board via UART using the tft pins and lpc21isp command below.
lpc21isp -wipe -bin ~/CanBoot/out/canboot.bin /dev/tt…
-
Flashed my ESP32 cam board (with OV2640 and the correct pinout for the programmer), also set to 'erase all flash prior to upload'.
After flashing board, board service AP becomes somewhat unstable, …
-
**🧐 Motivation**
Flash loans are a new DeFi primitive, popularized by Aave, where a borrower can take an arbitrarily large loan as long as they repay it back (with a fee) in the same tx. This provide…
-
## Environment
- Development Kit: ESP32-DevKitC
- Kit version: v4
- Module or chip used: ESP32-WROOM-32D
- IDF version: v4.2-dev-1905-g625bd5eb1
- Build System: idf.py
- Compile…