-
I flashed the firmware into the esp32-s3 but it doesn't show me anything. What can I do about it?
-
Problem: When I use tft.init() after define TFT_MISO as -1, The pin 19 I have inited before can not be write normally
IDE:PlatformIO
TFT_eSPI library version: 2.5.43
Board package version: 6.5.0
P…
-
Hi
This is meant to be an attempt of improvement on the display drawing speed after the ESP32 wakes up from deep sleep. In all the sources I've seen, the display call tft.init() at every wake of th…
-
Hardware: esp32 dev kit
Compiler: Arduino IDE 2.2.1
The acm_terminal example doesn't run together with the TFT_eSPI library.
If added some software lines to the example, to test the HostShiel…
-
I bought an inexpensive 1.8" TFT LCD not realizing it had a worse pixel density than the T-Display.
I used a custom User_Setup.h file with the latest TFT_eSPI library.
Most important variables lis…
-
Hi,
I have a project that requires two displays.
I am using the following mappings and using ILI9488 display :
#define TFT_MISO 19 // (leave TFT SDO disconnected if other SPI devices share MI…
-
I'm using an ESP32, ILI9341, which I can control with fill back grounds, draw lines etc. I can read text files and display them from the SD card using Serial.print, but no matter what I try for JPEGs,…
-
Hi,
I'm programming a [LilyGo T-Wristband](https://github.com/Xinyuan-LilyGO/LilyGo-T-Wristband) with Arduino core (no esp-idf) using ESP32-PICO-D4.
A ST7735 0.96" 160x80 TFT screen is connected u…
-
Adafruit ST7789 Wide Angle 240x240
ESP32 DeviKit v4
I'm try to learn how to use the module Display but If I digit this code:
import display
tft = display.TFT()
tft.init(tft.ST7789, miso=19, mos…
LDS79 updated
3 years ago
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.4 on 2024-04-16; LILYGO T-DECK with ESP32S3
```
### Code/REPL
```python
# Playgif
import sys
import supervisor
import board
im…