-
When using a mega, I get "fatal error: can.h: No such file.
I am not sure if any other libs are needed for this project.
Thanks
-
https://github.com/USEPA/USEEIO/blob/dea71bb68d49f98e790c8880a9e07073a2eb227e/import_factors_exio/concordances/exio_tiva_concordance.csv#L47-L49
These three minor countries are the only contributor…
-
> [kidde_cc1101.ino](https://github.com/tofurky/kidde_cc1101/blob/master/arduino/kidde_cc1101.ino) was developed using a [RM1101-USB-232](https://www.ebay.com/itm/433Mhz-CC1101-USB-Wireless-RF-Transce…
-
I have this little PCB that can hold several different STM32 CPUs. Among others (i.e. I currently have) 030, 103, 205, 303 and 405. Bravo to ST for making all these have the same footprint (even thoug…
-
First off, I want to give kudos to all that have contributed!! I've been [religiously] using llama.cpp for the past 6 months-ish and it's been amazing seeing the all the growth this project has gone t…
-
having issue with can driver for tiva c 123gxl board
example used provided in the example from apps
tm4cbringup:
int tm4c_can_setup(void)
{
int ret = ERROR;
// struct can_dev_s *de…
-
To work precisely, closed loops systems are the solution. But GRBL don't have support for it yet.
Two solutions are possible.
`1: add encoder to each stepper motor, and feed the encoder signals to…
-
**Problem**
I have tried to index an example project (uart_echo_rs485) without success. Here are the steps to reproduce (${IDF_PATH} is where the release/v4.3 have been cloned and installed):
```
…
-
https://github.com/USEPA/USEEIO/blob/c4eb1700cdaf1345a584a81dbf94e74f2e3f8681/import_factors_exio/useeio_imports_script.py#L88C64-L89C52
for 2012 it appears 83 of 9800 rows which are by EXIO commod…
-
Awesome project. Thank you so much for putting this together. Did have a few minor suggestions.
Can you add a pause button? This would be helpful if you had to step away for a second, but wanted to…