-
### The problem
I constantly have issues with lighting and switches asking for Re-Authentication and have seen other posts talking about this, but no bug reports, so here we are!
The authenticati…
-
### The problem
I rebooted my HA server then when it came back up about 4 of my Kasa/TP Link switches would not connect.
"[Errno 113] connect call failed"
I tried removing one device to re-add …
-
Have KL400L5(US) flashing green/orange, ready to provision on a 192.168.1.0/24 network, can't see it with:
`kasa --type=lightstrip --target=192.168.1.255 discover
`
or (the recommended default …
-
### The problem
I'm seeing the same behavior mentioned in https://github.com/home-assistant/core/issues/116089#issuecomment-2098705737
- A P115 plug that came with firmware 1.3.0 can be configured …
-
I get the "Invalid Request or Credentials" error in login() when I try to login in my p110.
I checked credentials, I tried changing psw, I tried removing the plug from the tapo app ad re-adding it. …
-
### The problem
Hello - Can we please re-open this issue? after a power cycle of 6 plugs, the messages subside for a few hours but then reappear sporadically. No where near the volume previously,…
-
### The problem
Receiving the following messages through the day - hundreds of them. Just installed TP-Link Smart Home and 4 Kasa plugs yesterday.
Logger: homeassistant.components.tplink.coordina…
-
Is there support for RTL8710CM yet?
I have a couple of devices (Tapo L920 LED controllers) using this chip and would love to be able to flash them with libretuya/esphome.
-
I recently acquired a set of KP115(AU) units to setup for power monitoring, and have them integrated into my Home Assistant Setup. Used python-kasa to pair them to the network on a separate device. De…
-
Just purchased a shrink-wrapped HS105(US).
Attempting to search for available APs using `kasa --host 192.168.0.1 --type plug wifi scan` results in being unable to query the device on `netif`, then …