-
In the previous version of SIM800L, many customers have put forward many good suggestions, so in the 7XXX version, the schematics are released first. Please give suggestions. We will adopt good commen…
-
I am using an ESP32-CAM module, and currently the camera power consumption is relatively high when the camera is idle. I have done several not very accurate current measurement using my test project u…
-
I have a supposed fake Wemos d1 PRO 16M clone which I was not able to flash. The supplier told me to flash it with DOUT instead of DIO. This seems to work, but now I sometimes have startup issues. The…
-
Hi, does the T5 v2.3 have built in cut off protection when using Lipo / Ion cells? and does it also have over charge protection? If so can you let me know what values these are, both cut off and over …
-
Hello,
I am using this board for my build and I am having power issues. Basically, the GBZ opens and functions normally with power from the battery, but the circuit does not charge it.
I have c…
-
Hi roger I hope you don't mind me commenting on one of your projects like this but, I can't seem to comment on your blog to ask a question, specifically this post https://www.rogerclark.net/ttgo-t5-ei…
-
## I'm submitting a support request
## Report
Battery lasting 8 days regardless of update interval and with a verified 3350mAh Panasonic NCR18650B. Logging current consumption, peaks at 99mA, av…
-
Please - if you just have a question (i.e. not a bug report or a feature proposal), post in our [forum](https://meshtastic.discourse.group/) instead.
**Describe the bug**
The spec says that the ra…
-
Hello,
A colleague suggested that I add a diode to The Jeffrey PCB to protect the 18650 lithium-ion battery from the 5 volts coming from the D1 mini when the D1 mini is plugged in via its USB port…
-
I have just finished constructing my iSpindel using the 3D printed sled, when I drop it into water it less almost flat, about 85 degrees.
![IMG_20200922_055149](https://user-images.githubuserconten…