-
### The problem
When creating a new device from esphome interface, the option to select BK72xx / RTL87xx chips is missing, despite esphome now officially supporting those chipsets.
They can still…
-
I am getting the above error when running try-cloudcutter for the first time. I used the instructions for a headless raspberrypi0w. the pi is connected to my Mac using usb. any help would be greatly a…
-
I'm going to take a long shot that this device is patched and it will need to be serial flashed but just in case, I will still provide the dumped rom for the device anyways.
[MOEs Switch.zip](https…
-
https://brilliantlighting.com.au/product/wifi-cannes-power-board-04c232
Chipset BK7231N
Tuya 1.1.8
Each power outlet can be controlled. The USB ports are grouped as the 7th outlet.
[BK7231N_QIO_…
-
I managed to apply tuya-cloudcutter to my [LEDVANCE Downlight](https://shop.ledvance.com/products/ledvance-leuchte-fur-decke-smart-surface-downlight-tw-22-w-220-240-v-ausstrahlungswinkel-110-tunable-w…
-
Hi I have a door sensor and try to flash it using the tuya-generic-cb3s-door-sensor-v1.0.10.json profile. I use the following command to set up the device:
sudo ./tuya-cloudcutter.sh -d basmnt_door_…
-
Firmware dump only:
[CalexOriginalLEDStripFirmware.zip](https://github.com/khalednassar/tuya-cloudcutter/files/8456611/CalexOriginalLEDStripFirmware.zip)
"Calex Holland Smart Multi Color Led Strip…
-
I am trying to flash a Brilliant Lighting Frontier 20W Smart LED Twin Flood Light with Sensor (pictured below).
![image](https://github.com/tuya-cloudcutter/tuya-cloudcutter/assets/62098407/b1a36ee…
-
Hi there,
i have an issue while running the build-profile script, i'm stuck at this point :
`[!] A new token should be sent to your network, and this script will continue.
[!] Note: this will joi…
-
wlan0 not allowing AP support. I have followed everything to the tee in https://github.com/tuya-cloudcutter/tuya-cloudcutter/blob/main/HOST_SPECIFIC_INSTRUCTIONS.md
```
xxxx@raspberrypi:~/tuya-clo…