-
Hi,
I'm running Rasbian the latest version on an RPI4 compute module. On it I installe olad 0.10.8. On the same host I have also 2 extra FTDI USB adapters that go to a p1 port (DSMR smart meter fo…
-
```
hi there,
Nowadays, thanks to wonderful usb-serial adapters, it is possible to run at
virtually any baud-rate. But QESP is still restricted to a predefined list.
Is there any consensus to updat…
-
```
hi there,
Nowadays, thanks to wonderful usb-serial adapters, it is possible to run at
virtually any baud-rate. But QESP is still restricted to a predefined list.
Is there any consensus to updat…
-
```
hi there,
Nowadays, thanks to wonderful usb-serial adapters, it is possible to run at
virtually any baud-rate. But QESP is still restricted to a predefined list.
Is there any consensus to updat…
-
```
hi there,
Nowadays, thanks to wonderful usb-serial adapters, it is possible to run at
virtually any baud-rate. But QESP is still restricted to a predefined list.
Is there any consensus to updat…
-
Hi all,
I am trying to have a urwid menu (Hello World example) available over a serial COM port instead of stdin/stdout, however, it does not seem to work.
I use two connected serial -> USB adap…
-
Hi.
Right now according to [official documentation](https://networkupstools.org/docs/man/bcmxcp_usb.html) bcmxcp_usb driver supports only one UPS at a time. Unfortunately I have lots of Eaton PW9120 …
-
Il problema si verifica tipicamente con gli adattatori seriali USB. Quando utilizzo un adattatore seriale usb il kernel crea un device nella cartella /dev (Mac e linux), questo device viene rimosso ap…
-
I got this error and I am not sure what packet 0x20 or 0x32 means. Is it a hardware issue? Any help is appreciated! Thank you!
[ INFO] [1625177470.016575528]: RosAria: set port: [/dev/ttyUSB0]
Con…
-
Thank you so much for making this, I have always wanted to resurrect my iSight Camera!
I have started to order the parts for this project and I am at the point where I can start installing the soft…