-
How to make an SPI-only solution, that is, no USB -- A tool to program the CSR or QCC chips directly with SPI commands, say from an Arduino.
Which parts of this code would be needed?
Is a comma…
-
* pyusbiss version: 0.1.2
* Python version: 3.4.2
* Operating System: Raspbian
**### Description**
Hey Dancing Quanta,
Following your patch to pyusbiss, establishing communication to a alpha…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
ckls updated
6 months ago
-
### Hardware
ESP32-C3
### Firmware version
v2.4.6
### Application version
v2.4.6
### What happened? What did you expect to happen?
Compiling the code from scratch ( arduino ide 1.8.19) for ESP…
-
Hi,
I have this very peculiar Macbook Air:
```
$ sudo dmidecode | grep -i mac
MCE (Machine check exception)
MCA (Machine check architecture)
Product Name: MacBookAir7,2
Family: Mac
Prod…
-
I manged to issue a "pull request" for the libopencm3.
But somehow my git is now messed up, so I'm getting push/pull/merge errors when I try to clean up the patch. So... here is the patch:
```
diff…
-
- SD slot
- ~Pin header with SD/SPI signals (Monideth Pen, Hlide Fremen)~
- Input fuse (SMT chip fuse - Optional/Bridgeable - Keirf)
- USB power switch (Optional/Bridgeable - Keirf)
- Replace res…
-
Hi all,
I'm really at a loss here. I purchased the full sized USB shield (as I couldn't get the mini in Australia) to use with my Teensy 3.2. On my Arduino UNO it functions perfectly fine, however …
-
Hi,
Any chance to support /sys/class/gpio under Linux (like most SBC boards have)?
Or via some USB dongle:
http://www.zoobab.com/ch341-usb-spi-i2c-uart-isp-dongle
-
I have the problem that some of the specified pins are already reserved for CAN. This means that I cannot use the ADXL cs_pin: EBBCan:PB12. Klipper gives error, is reserved for CAN. The E3EZ uses PB12…