-
> The XL7015 works fine, however it is not short-circuit proof and misbehaves when overloaded. As most buck-converters, this chip fails by shorting the main switching transistor, applying VBUS to the …
-
Vznikna nabíjecí/stepdown řešení (modul nebo integr. na desce), který bude zapojen do napájecího systému desky. Budeme chtít nabíjet baterku z USB. Modul bude
- USB budeme chtít přes QC na vyšší napě…
-
The blue LEDs in #23 have a forward voltage of 3.9 V, but they are supplied by VBUS which can be as low as 3.6 V when operating on battery power. They fade out as the battery is drained (which might …
-
If I plug my pinecil into a dumb non-qc non-pd output like my pc.. the pinecil fails to power the heater circuit because 4.98V is 'undervoltage'
When connected to my phone which does pd negotiation…
-
### Operating System
Linux
### Board
Custom board with STM32H730 and USB3343
### Firmware
tinyusb 111515a
FW based on custom RTOS, no caches
should not be relevant for this case
tu…
-
At this point I have been at this for days so here is the issue, I have this code on an arduino nano
```cpp
void setup() {
Serial.begin(115200);
}
void loop() {
while (Serial.available())…
-
Hallo,
Script läuft nicht mehr, nach Update auf Scriptengine 4.1.14 ...
Fehler:
ror | Error in callback: TypeError: conn.connect(...).done is not a function
-- | --
Nach Downgrade auf…
-
@michalgaska please check
- [x] CPU power supplies
- [ ] ADC reference
- [x] buck converter
- [ ] I2C devicess addresses (conflicts) c
- [ ] current measurement range
- [ ] PoE circuit
…
-
Hi,
it's not an issue, but more a question: How and where could i get the information to create a specification like 'DeltaSol BX' for my 'DeltaSol M'. I adjusted the one for 'DeltaSol MX 2' to ge…
-
## Desc Test
- I am running example code **USB_desc** and unable to get working. All descriptor read as 0.
- Correct me if I am wrong. I have attached connection as well as version information.
…