-
Dear @derekbackus you made this mod https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/DerekBackus/Right_Skirt_Switch
Could you please add a 250mm skirt version too?
Please let me k…
-
Voron 2.4 300mm
Buenas tardes, favor de indicar cuantas cantidades de cada pieza se imprime y de que color de filamento ABS si es negro o rojo ...Eso no está claro en la carpeta de STL
-
Hello,
is it possible to get a .step file for this part?
(https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/STLs/Gantry/AB_Drive_Units)/a_d…
-
The PITFT50 45-degree mount STL and CAD files do not match the description or photos. All the files are for a display smaller than the PITFT50, and are on a 90 degree mount.
https://github.com/Vor…
-
Some files in this forder are suffixed with _r1 or _r2 based on the voron 2.4 revision
This file is just suffixed with _r without a revision number but is actually a 2.4r2 replacement file
https…
-
the monster8 v2 has different pinouts like for endstops they are marked with signals in reverse can somebody tell me what i need to change in the example config to get it working?
https://github.co…
-
The dual Z tension 2.4R2 is too wide for some lower panels. Had to mod the A and B parts, removing 2mm from the inside edge to for the panel from my LDO kit.
https://github.com/VoronDesign/VoronUse…
-
p 139 has a link that 404s because of the extra character
`https://docs.vorondesign.com/%20`
-
In the current version of the repo, there is an STL file [`VHB_Din_Mount_x2.stl`](https://github.com/VoronDesign/Voron-0/blob/Voron0.2/STLs/Electronics/VHB_Din_Mount_x2.stl), which replaced an older S…
-
Really love the MGN9C mod for the V0 by @hartk1213
[printer_mods](https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods)/[hartk1213](https://github.com/VoronDesign/VoronUsers/tree/mas…