-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
square dot
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ ] I…
-
### The problem
Begin January 2023 I uploaded 5 new WEMOS S2 mini boards (Lolin v1) using ESPHome over USB via the "manual" mode. That alml worked fine, as long as I put the board in boot mode (press…
-
I am not a software programmer by profession and I am just a DIY enthusiast so plese go easy on me as I put down my peculiar problem.
When I first configured my first 4 devices on Sinric and got i…
-
Hello,
This project is great for me, i want to delete dmx cable between midi foot module and light devices.
But I'm not sure to understand what I'm suppose to do... I have 4 lights with one d1 mini …
-
- [ ] check with termal camera what generates heat.
- [ ] check GPIO0 states influence on current consumption.
- [x] check influance of disabling uart converter.
- [x] check influence of direct p…
-
-
Hi!
**I'm new here**, trying to set your **great** Stino under Sublime Text v3.0, Build 3143, and I want to report an error when selecting **sketchbook -> espressif esp32 board**. The error is:
"Err…
-
### The problem
The code below works for months without any prolems until the update to 2021.10.2.
The esp doesn't connect to wifi with the reason "Auth expired". I post the log written by the too…
-
I am using EthernetENC.h library ver. 2.0.4 with hardware ENC28J60 + D1 mini Wemos ESP8266 boards.
I program the ESP8266 with Arduino IDE 2.1.0; I tested the example sketch “WebClient” and it works c…
-
Hi Calvin Hass and M Hotchin,
I used your src to run 9486 on ArduinoMega and ESP32 and Wemos. On Mega everything is ok.
On ESP32 I have "blank screen" serial port shows communication.
On Wemos s…