-
Large amounts of serial output causes the emulator to slow to a crawl. I'm not sure what the best way to fix this is, but maybe not sending serial output to the GUI thread one character at a time woul…
pbfy0 updated
4 years ago
-
I was unable to upgrade a HUSBZB-1 (5.4.1-192) using the docker image. Restarting the computer and unplugging and re-plugging the stick didn't fix the issue.
>sudo docker run --rm --device=/dev/tty…
-
I am using tio v2.7 as packaged in Ubuntu 24.04.
When transferring a file I saw this output:
```
[13:17:26.226] Send file with XMODEM
[13:17:33.168] Sending file 'spl/u-boot-spl.bin.normal.ou…
-
Follow up to https://github.com/itead/Sonoff_Zigbee_Dongle_Firmware/issues/28 for tracking as separate issue because also need a EmberZNet NCP 7.3.x.x firmware image for Zigbee2MQTT migration.
@Dan…
Hedda updated
3 months ago
-
-
# Instalasi OpenWrt di BOLT! Arion (PL100) | Blog KopiJahe
Pada kesempatan kali ini, saya merilis OpenWrt untuk router BOLT! Arion (PL100)
[https://blog.kopijahe.my.id/posts/bolt-arion-openwrt/](htt…
-
While the pyspinel is not made for Zigbee but for OpenThread NCPs instead, concepts in the Spinel CLI might however still be interesting as it is a relatively mature CLI for an NCP and actively mainta…
Hedda updated
9 months ago
-
Let us complete @tehmaze vision of the python 'modem' module, https://pypi.python.org/pypi/modem/1.0 and https://github.com/tehmaze-labs/modem
- [ ] design: how should an API for batch file send/recv …
-
When using `ncp.py flash` script with an unupdated/original HUSBZB-1 firmware/bootloader, I get a hang at:
```
# ./ncp.py flash -p /dev/ttyUSB1 -f ncp-uart-sw-6.7.8.ebl
Restarting NCP into Bootlo…
-
I built U-boot following the instructions on Github and everything seemed to compile properly but after flashing it seems it was a bad build. I’m trying to recover the firmware using the instructions …