-
I am encountering the following problem when trying to program an ATtiny88 using avrdude v8.0 with the PICkit4 in ISP mode.
### Command Executed:
```
avrdude -C avrdude.conf -v -p attiny88 -c p…
-
The hardware uses the 470 full-duplex reference design provided by Semtech: SX1302CFD490GW1_e537v03a_490MHz_prod_folder
During the test, it was found that when the transmission power is greater than …
-
With the Feather M0 Adalogger we use the [FeatherWing - RFM95W 900 MHz](https://www.adafruit.com/product/3231) shield, this has the SX1276 chip. With the Waspmote we have a shield with the SX1272 chip…
-
### Description of the feature you're suggesting.
Have tried two different versions of this card, not reading on Flipper. I'm not sure on source of the cards, our HOA uses them.
[Unknown RFID Card…
-
Hi, Stefan. I encountered a very strange error.
I programmer an ATTINY13A-SSU with MicroCore use your AVR Programmer Adapter Maxi. When I set the clock to '1.2 Mhz internal osc', everything works f…
-
I'm attaching an .ssd to demonstrate the issue which occurs when playing software generated bass through interrupts. There appears to be sound corruption introduced between these two releases:
https…
-
I updated an original B6AC with an USBASP and AVRDUDE and got some squares on the first line of the screen.
I pluged the charger and since then I have a black screen and the message "target does not…
-
i have plans to test you stack in our LoRaWAN module, the LSI110A
it's is a STM32WL55+SX1262 :)
-
```
Pycom MicroPython 1.20.1.r2 [v1.11-06dfad0] on 2019-11-30; LoPy4 with ESP32
Pybytes Version: 1.3.0
```
After some random time (one case was after approx 2 hours), I got two different core du…
-
In PIVSecurityProvider.java, lines 307-314 of checkAccessModeAdmin():
```
//
// ACCESS CONDITION 3 - User Administration Privilege
//
if ((mode != PIVObject.ACCESS_MODE_ALWAYS)
…