-
What model are the two 6-pin connectors for the CAN-BUS and voltages 24 and 48? Is it possible to find them on Amazon?
-
go run ./cmd/openess/*.go -b -d 192.168.1.128:58899 -l debug
INFO 2024/09/21 07:36:40 client: connecting to device 192.168.1.128:58899
DEBUG 2024/09/21 07:36:40 proto: starting up tcp server on…
-
Hi!
Since in my packs built from used 18650 there is no use for small balancing currents as they are not all same capacity, I was wondering if you were thinking about using mosfet as dummy load or …
-
Hello Staurt,
what is the maximum of All in one V490 on one Controller.
I have a LTO Storage and i need 40 pcs from this on one Controller can we make this or what can we do for realisation?
Be…
-
We'd like to try running Venus on Pi 5, any plans to build an image for the '5 in the next release(s)?
https://community.victronenergy.com/questions/240780/raspberry-pi-5-supprt.html
-
GPS isn't being logged, fixed in branch notifications
Now noticed CSV export is a bit off, looks like it's getting a return carriage. Will look into it.
[owlogs_2018-05-27_14_55.csv.txt](https://…
-
Im having these random errors. Errors are not module constant. Im trying to isolate the problem but Im out of Ideas at this point.
I tried changing comms from serial 1 to serial 2 but problem persis…
-
Hello,
Thanks for the awesome work you made for us !
I have a TSDZ2 750W, a XH18 display and a 48V 10.5Ah battery.
I've successfully calibrated the torque sensor and got values very closed to t…
-
hey guys, long story short , i bought my first cnc machine days ago , i did the assembly and everything but i'm having problems with the Z-axis sometimes it goes too high or too low i didn't change a…
-
Hello Angelo,
Thank you very much for sharing this awesome project with the world. I learned a whole lot about synchronous buck converters and mppt, all thanks to your instructable.
I'm wonderin…