-
## Description of the problem (how to configure, how to reproduce, how often it happens).
Opening a separate issue for https://github.com/greearb/ath10k-ct/issues/136#issuecomment-641095620:
A Net…
-
In specific field only RF conditions, some WPA2 IBSS links can be established but no traffic is received
OpenWRT Chaos Calmer, Kernel 3.18.45, mac80211 backported from v4.4-rc5-1913-gc8fdf68, drive…
ghost updated
6 years ago
-
1. Setting of power level.
- We can get maximum txpower through command `iw phy`. https://github.com/openwrt/mt76/issues/216
2. MU-MIMO support.
- https://wireless.wiki.kernel.org/en/user…
-
Got a configuration error is I like to use VHT160. VHT80 is working fine. Here are the logs, configuration attached.
[wireless.txt](https://github.com/openwrt/openwrt/files/8161179/wireless.txt)
W…
-
### Describe the bug
After upgrading on 22.03.3 release I faced an issue. After 2-3 days of normal work, the WLAN interface goes down unexpectedly. A restart of the interface does not help, only a …
-
HW: QCA9882
When there is 80 to 100 APs around, scanning aborted:
iw ap0 scan
scan aborted!
Here is my setup:
iw dev
phy#0
Interface ap0_0
ifindex 19
wdev 0x5
…
ghost updated
5 years ago
-
Hello,
Have you had a chance to look into spectral scan? https://wireless.wiki.kernel.org/en/users/drivers/ath10k/spectral
I tried the instructions and was not able to collect any data, the "sp…
-
Hi,
I'm using a dell precision 5530. My nvidia card is:
`01:00.0 3D controller: NVIDIA Corporation GP107GLM [Quadro P2000 Mobile] (rev ff)`
And for my intel card I'm using
`00:02.0 VGA com…
-
the wifi work normal after initial boot, but when do scp, wifi seems no problem but not work.
dmesg with this error: ath10k_snoc_1800000.wifi: failed to extract amsdu: -11
ps: the laptop is …
-
We are trying to make https://www.8devices.com/products/red-bean work with ath10k. This device is based on QCA9733. The PCIe "BLACK bean" works OK, but we need SDIO. Firmware is available here:
htt…