-
I'm using SoapySDR with a bladeRF xA4 on Ubuntu and it would be wonderful to be able to specify the source as a SoapySDR device in the `goesrecv` configuration file.
Right now I'm looking at ways t…
-
This is the issue that I am facing continuously: Can someone suggest some solution to this. Thanks in advance
Initializing GNSS-SDR v0.0.10 ... Please wait.
Logging will be written at "/tmp"
Us…
-
First off, amazing code. Great to use and very easy to get going. Was wondering if this addition could be made.
Using a Bladerf 2.0 device to sniff BLE packets. Successfully able grab packet inform…
-
Feel free to close this if you don't agree.
I feel the default of hackrf is less than ideal. I love the hackrf as much as the next person, but I would default to a more capable and likely radio li…
-
Recently, I am reading the core code about the frame detection described in your repository called SDR_Matlab_OFDM_802.11a_2.4GHz. But some parameters setting confuse me. To be exact, i do not underst…
-
Hey,
I'm tinkering with your flowgraph using a bladeRF sdr and changed freq_start to 2.4ghz and freq_end to 2.5ghz.
Running the program looks like ![this](https://user-images.githubusercontent.c…
-
I'm experiencing "Failed to open device (first available): A memory allocation error occurred" error when starting bladeRF-cli. I have tried to get some assistance on the official bladeRF forum, but i…
-
Hi all,
Is there any introduction on how to record GPS raw signal? I'd like to record the received GPS signals and fresh ephemeris by bladeRF. Thanks.
-
i try to update code for using sample rate = 122.88Mhz but i have issues so Could you please update python code and make it available for the public.
Thank you
-
There are "actual" sample rates returned by `bladerf_set_sample_rate()` that will result in `BLADERF_ERR_INVAL` or invalid values when attempting to set these rates via `bladerf_set_rational_rate()`.
…
jynik updated
6 years ago