-
## Abstract
For now we have these flashtools:
- devcube gui, devcube cmd (bflb_mcu_tool/bflb_iot_tool)
- flashcube gui, flashcube cmd (blflashcommand)
Devcube has mcu and iot, mcu is only used…
-
**Update:** Already upstreamed.
## Install XuanTie RISC-V toolchain
```
wget https://occ-oss-prod.oss-cn-hangzhou.aliyuncs.com/resource//1663142243961/Xuantie-900-gcc-elf-newlib-x86_64-V2.6.1-2…
-
I tested with XT-ZB1 devkit from aliexpress with:
- csky debug server with HLK CK-Link Lite debugger
- csky debug server with Sipeed RV Debugger Plus (ck-link lite firmware)
- RV OpenOCD with Sip…
-
Hey @smaeul
I'm trying to get this into buildroot, but still with our D0 low_load code and I'm failing.
Right now, just for testing, i'm building uboot/opensbi for D0 using your instructions outs…
-
Hi @Jatsekku I hope this question is relevant in this issue. Can we use this tool to flash BL702 through USB? Thank you.
-
**Is your enhancement proposal related to a problem? Please describe.**
I start to integrate `bl_mcu_sdk` with Zephyr RTOS. I noted that there are duplicated code between devices and would like propo…
-
Hello again guys, I am trying to run a bl616 as a usb hid keyboard, I noticed the example from the cherryusb repo, I imported the c-file in my project and looks like it compiled , the problem i see is…
-
There does not seem to be much in the way of documentation for using JTAG with the BL808 chip. I have been trying to use a RV Debugger Plus with a Ox64 board but am not able to examine any of the cor…
-
There are several issues here that are answered with **"refactoring"**
Is There any ETA available on when this **"refactoring"** will be done and available?
will it be one large update ... or will…
-
I have a problem uploading my code. I already changed the permissions of the executable files, but now I'm getting the following errors:
```
/home/username/.arduino15/packages/bouffalo/tools/flasher…