-
bl-mcu-iot I can't find how to use the wifi feature, is there not yet a wifi SDK feature for BL602 in this SDK?
Is there a bouffalolab team that can help?
-
Hi, and thank you (again). I was about to drive a 7735 from BL602, and thought I'd give your demos a try.
Of course, the resolution is wrong and the chip is wrong, but I thought that would be a few e…
-
I'm writing this as a note to myself so i can preserve state and go to sleep. A fresh pull of Nuttx that synchronizes up to
1ca9689c849bbc08cfae03967c196ac8880577f1 fails to build. It bomb on the int…
-
Hi hope you are well...
I've sucessfully connected to the above board using openocd (via jtag):
```
jtag
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for teln…
-
sorry to bother with a simple question :).
I've successfully connected to the above board using openocd (via jtag):
```
> sudo openocd -f ~/my_vsllink.cfg
Open On-Chip Debugger 0.11.0-rc2
Lice…
-
Hi!
I find this project really interesting, and I would like to reproduce the same functionality in an OpenOCD script, that would integrate more easily in my dev environment. I only need the part t…
JF002 updated
3 years ago
-
https://bouffalolab.github.io/bl_iot_sdk/ is down
![Screenshot_20210424_172715](https://user-images.githubusercontent.com/31200881/115954216-53e63900-a522-11eb-924a-414d8ab49742.png)
-
Please add "sipeed RV plus Debugger BL702" board support as mcu target.
It would allow for the favorable setup with two sipeed BL702 boards: one as mcu and one as debugger.
Also Iam looking for the…
-
-
Hello!
I'm trying to use this SDK to build an app for the BL602 (Pine64 board). I tried to build the helloworld app as follows:
```
make BOARD=bl602_iot CHIP=bl602 APP=helloworld
```
But I …
JF002 updated
3 years ago