-
I flashed dafang_128mb_v2.bin to my camera successfully. MD5 Sum of the downloaded file matches what is listed in the repository.
Camera boots to uboot and gets stuck there. This camera uses a ZB25VQ…
-
My device originally said it was 128MB during startup - I had to flash the uboot from the original folder in order to get hacks to work (it now reports 64MB). Is it possible to get a version of the bo…
-
In the ldr.sh script the value coming out of:
/dev/jz_adc_aux_0 count=20 | sed -e 's/[^\.]//g' | wc -m >> /var/run/ldr
never seems to change and may be the root cause of the problem. i even p…
-
Can someone confirm if this is compatible with the original XiaoFang (ARM?) supported by fang-hacks? Is this the same as the Wyze V1?
-
# Receiving files, pictures, and videos over MQTT
IoT devices use MQTT for a lot of things, but why is it so difficult when they use MQTT to send files, pictures, and videos?
[https://davidmac.pro/p…
-
Hello,
With this version of v4l2rtspserver, does the HLS stream working? I cannot find the correct parameter to put in the .ini file (and I don't know if it exists or not). In the previous version,…
llimz updated
5 years ago
-
I hacked the camera and with TinyCam and IP Cam app on android work nice. I try to connect camera also to Hikvision NVR DS-7108N-SN through custom rtsp protocol, but until now without any success. Hav…
-
Hi
I have an Xiaofang with an mac adress that starts with 34.
It is currently att firmware 5.6.2.77.
I have tried to run the hack with the image file "fanghacks v.0.2.0". And it makes a sound lik…
-
Xiaomi xiaofang Smart 1080P WiFi IP Camera (iSC5 model) can be view here
https://www.gearbest.com/ip-cameras/pp_620813.html
It is very cheap and sounds to have good quality (and 2 can be paired for …
-
The MQTT client doesn't support user authentication. It's mentioned in the camera configuration that if your MQTT Broker requires user/pass authentication, you can set it up on the camera, which I did…