-
I suspect the interrupt on pin 2 is not working
The program decodes the DCF77 signal into a time
For decoding it makes use of the DCF77 library of Thijs Ellenbaas and my own non-interrupt algorith…
-
Hi
Trying to run Paxcounter V1.9.98 with the following hardware:
- TTGO T3 V1.6
- 433 MHz with `CFG_eu433 1`
When i try to build the code with `CFG_eu433 1` the following output is generat…
jsa91 updated
3 years ago
-
Hi John,
since I have connected eBus USB Koppler von Esera, current datetime and desired room temeprature are occasionally reset (lost) on my Vaillant 470f regulator. Unfortunately, I don't know …
-
Once #4 is done
Add functionality to decode the NPL transmission at 60 kHz. Since NPL transmits 2 bits per second, having a more fixed signal timing is helpful.
There will probably be 2 time decoder…
rene0 updated
4 years ago
-
I have successfully used the JJY60 service on pi zero to sync a citizen watch from japan which can’t receive any other service. I used the transistor circuit by Andreas Spiess with a ferrite 60hz rece…
-
Dmitry, just wanted to say thanks very much for writing these programs, especially Kiwirecorder. Don't know if you've been following the pulls being submitted recently to my fork. But lots of excellen…
-
thanks to @chegewara, the latest changes on this app use a modified version of the ESP32_BLE library where many memory leaks are fixed,
This version hasn't been released yet and might change in th…
-
From forum PM:
I'm working on a digital clock displaying time and date.
I am recieving the time data from the german DCF77.5 Broadcast.
The data is processed by the controller and send to a DS130…
-
I use same code that you posted and change the hmacKey by using my own secret key from the webpage provided by you and the QR-code was scanned by google authenticator and upload code to arduino but th…
-
FineOffset WH1080 868.3 branded WX-2008 has FSK coding
signal samples uploaded at rtl_433_test/WH1080/05
https://groups.google.com/forum/#!topic/rtl_433/tJ3U81aFiP0
tried to do some progress on htt…